Raglan Lifestyle Shed

Aluminium Fixed Window

A high quality NZ manufactured aluminium joinery fixed window is perfect to let extra light into your shed. You can choose to have it match the cladding colour, the door colour, or any other available colour you prefer. The flashings surrounding the window must match the other flashings on your shed. Window measures 970mm W x 520mm H.

Aluminium Opening Window

A high quality NZ manufactured aluminum joinery opening window is perfect to let extra light and ventilation when you need it into your shed. You can choose to have it match the cladding colour, the door colour, or any other available colour you prefer. The flashings surrounding the window must match the other flashings on your shed. Window measures 970mm W x 520mm H.

Lifestyle Shed Timber Floor Kit

Upgrade your flooring with our Plywood and Timber Floor Kit options, including cut-to-size 17mm H3 plywood sheets, or cut-to-length thick gauge H3 timber floorboards, ground treated timber joists, treadplate doorway flashing and all necessary hardware. Note that Timber Floor Kit's floorboards are supplied in a separate pack from the main kitset.

For Marlborough and Kaipara models, the bottom plate sits on top of the floor, and waterproofing is achieved with a DPC membrane.

Clear Roof Panel

Duratuf Clear Roof Panels provide UV free natural daylight inside your shed. This is perfect if you are using your shed for a workshop and need light while the door may be closed. Please note that clear roof panels may condensate more than a steel roof during cold weather.

Snow Load Upgrade Kit

Live in New Zealand’s high country where snowfalls are regular? We have you covered with a NZS 3605 standard 1 kPa engineered load rating on all our Lifestyle sheds.

However, for those higher elevation areas with severe snow, the Snow Load Upgrade Kit is a perfect addition to your Lifestyle shed, with a 2kPa upgrade Snow Load kit option to suit NZS 3604 standards, reinforcing the shed's inner roof structure.

This kit is only available for the following models: Whitford, Otago, Havelock, Kapiti, Glenburn, Ardmore, Oxford, Wairarapa and Paihia.

For an NZ snow load map visit:

https://www.level.org.nz/fileadmin/downloads/

Site_Analysis/Snow_Zones_Map.pdf

Very High Wind Upgrade Kit

The Lifestyle shed can withstand most of Mother Nature’s wear and tear, but for those Very High Wind Zone areas, we offer an NZS 3604 Very High Wind Zone shed upgrade kit for the following models: Whitford, Otago, Havelock, Kapiti, Glenburn, Ardmore, Oxford, Wairarapa and Paihia.

Very High Wind situations are as defined in NZS3604. The BRANZ website may also be of use: www.branz.co.nz/branz-maps-zones. For some Lifestyle shed models in these areas, a Very High Wind Upgrade kit is required, in combination with a concrete floor, to maintain compliance with the Building Code.

The Shed models this applies to are those that are greater than 2.0m deep front-to-back (with the exception of the Kinloch model). Note: Very High Wind upgrade kits cannot be used with Timber Floors; if this is necessary, please refer to NZS3604 or professional engineering advice.

Pedestrian Access Door

Take your accessibility up a notch with a pedestrian access door (810mm W x 1920mm H). The door is steel framed and can be the same colour as the shed, the roller door, or whichever other colour you prefer. 

Bolt Down Kit

If your shed is to be attached to a concrete floor or base, the Bolt Down Kit allows you to securely anchor your shed without damaging either your concrete pad or the timber frame of the shed. The kit consists of hot dipped galvanised steel brackets, with Dynabolts to anchor into the concrete floor and screws to attach to the bottom frame.

Shed Alarm

This innovative mains free shed alarm is easily fixed inside the framing of your Duratuf shed. Features an ultra-loud 130db siren.

Heavy Duty Workbench

For a solid working area and extra storage capacity you need a heavy duty work bench. This well designed bench has a unique lock together construction with a 250Kg load rating per shelf support. Approximate size: 1140mm W x 500mm D x 900mm H